New Cartmaster dust collector
Niederlangen6596 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 5939 9...
Show
+49 5939 940640
+49 5939 9...
Show
+49 5939 940650
Germany 
Germany, Niederlangen
Germany, 71691 Freiberg Am Neckar
Germany, Location:munich
Germany, Egenhofen
Germany, Pullach
Germany, Egenhofen
Germany, Egenhofen
Germany, Emskirchen-Pirkach
Germany, Egenhofen
Germany, Bünde
Germany, Dabergotz
Germany, Metten
Belgium, Deinze
Slovakia, Kežmarok
Slovakia, Kežmarok
Pressung 2.900 Pa
1,1 kW
filter surface area 10 m²
72 dB(A)
400/50 V/Hz
665 x 1100 x 1495 mm
- Hose arm 3 m, joints inside
- Filter cartridge: dust class M
- Pre-filter: baffle plate
- Current type: 3Ph+N+PE
The filter system
---------------------------------------
The mobile filter system of the Cartmaster IFA type is thanks to the automatic
Cleaning particularly suitable for welding work with unalloyed and
alloyed steels, galvanized material and aluminum with heavy smoke development.
It corresponds to the safety requirements for devices
Welding fume class "W3" (high-alloy steels with alloy components 30%
Nickel-based alloy).If used as intended, the system can be used for the
Recirculation mode used because the requirements for the
Exceptions according to TRGS 560 are fulfilled. That special
developed, dirt-dependent cleaning system ensures a good
cleaning behavior of the filter cartridge, so that an optimal suction
performance
is guaranteed throughout the operation. The cleaned particles
fall into a dust collection drawer from which they can then be disposed of.
The powerful spiral fan ensures even with saturated
Filter cartridges for a high volume flow.
The filter media
---------------------------------------
A baffle serves as a pre-separator for coarse particles.
The filter cartridge installed below (dust class M, degree of separation 99%)
filters the finest smoke and dust particles. The cartridge is factory
coated which increases the service life.
The extraction arm
------------------------
The extraction arm can be moved with the 3 internal joints
Position spring support slightly and is in the set position
cantilevered. A throttle flap integrated in the extraction hood enables the
Flow rate setting.
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saugkraft Pressung 2.900 Pa
Antriebsleistung 1,1 kW
Filterfläche 10 m²
Schallpegel 72 dB(A)
Anschluß 400/50 V/Hz
Raumbedarf ca. 665 x 1100 x 1495 mm
Sanders Artnr. 10224980
Absaugung, Schweissrauchabsaugung
(automatischen Abreinigung)
- Schlaucharm 3 m, Gelenke innen
- Filterpatrone: Staubklasse M
- Vorfilter: Prallblech
- Stromart: 3Ph+N+PE
Die Filteranlage
-------------------------
Die mobile Filteranlage vom Typ Cartmaster IFA ist dank der automatischen
Abreinigung besonders geeignet für Schweissarbeiten mit unlegierten und
legierten Stählen, verzinktem Material und Aluminium beistarkerRauchentwicklung.
Sie entspricht den sicherheitstechnischen Anforderungen für Geräte der
Schweissrauchklasse "W3" (hochlegierte Stähle mit Legierungsbestandteilen 30 %
Nickelbasislegierung).Bei bestimmungsgemässer Verwendung kann die Anlage für den
Umluftbetrieb verwendetwerden, da die Voraussetzungen für die
Ausnahmeregelungen entsprechend der TRGS 560erfüllt werden. Das speziell
entwickelte, verschmutzungsabhängige Abreinigungssystem sorgt fürein gutes
Abreinigungsverhalten der Filterpatrone, so dass eine optimale Absaugleistung
während des gesamten Betriebes gewährleistet ist. Die abgereinigten Partikel
fallen in eine Staubsammellade aus der sieanschliessend entsorgt werden können.
Der leistungsstarke Schneckenventilator sorgt selbst bei gesättigten
Filterpatronen für einen hohen Volumenstrom.
Die Filtermedien
-------------------------
Ein Prallblech dient als Vorabscheider für grobe Partikel.
Die nachfolgend verbaute Filterpatrone (Staubklasse M, Abscheidegrad 99%)
filtert feinste Rauche und Staubpartikel. Die Patrone ist werksseitig
beschichtet wodurch sichdie Lebensdauer erhöht.
Der Absaugarm
------------------------
Der Absaugarm lässt sich durch die 3 innenliegenden Gelenke mit
Federunterstützung leicht positionieren und ist in der eingestellten Position
freitragend. Eine in derAbsaughaube integrierte Drosselklappe ermöglicht die
Einstellung des Volumenstroms.