Kontur 400 Termoplastic road marking machine
Warszawa
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+48 532 82...
Show
+48 532 821 483
Poland, Warsaw
Poland, Warsaw
Poland, Warsaw
Poland, Warsaw
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Turkey
Bulgaria, Varna
Germany, Wendelstein
Germany, Wendelstein
Mexico, Chihuahua
Czechia
Overview
The Kontur 400 is a modular road marking machine. The type of module determines the marking material and application method. Any module can be replaced directly by the user, and additional modules can be added at any time.
Base Self-Propelled Chassis (Standard Configuration)
Slidable operator workplace with two seats, hard roof, rear-view mirrors, and controls
Marking control panel
Hydraulic steering
Standardized hydraulic oil and compressed air connections
Glass bead tank
Lighting and flashing lights
Marking unit light and operator workplace light
Manually lifted/lowered mechanical aiming device
Automation and control units
Piston compressor
Two fire extinguishers
Chassis Options:
Rear platform for a support worker and road cones
Kontur 400H – Cold Plastic Module
Designed for thick-layer marking using cold plastic. Comprises the basic Kontur 400 chassis and a cold plastic module. The marking unit can apply flat or structured lines 100, 120, 150, 200, 240, 250, or 300 mm wide. Applicator sizes must be specified when ordering.
MH400 Cold Plastic Module – Standard Configuration:
Cold plastic tank
Hardener tank
Flushing liquid tank
Cold plastic dispensing system
Hardener dispensing system
Single line marking unit
Hydraulic agitator in the cold plastic tank
One flat or structured line applicator
Module Options:
Additional flat and structured line applicators (100, 120, 150, 200, 240, 250, 300 mm)
Kontur 400K – Paint Module
Designed for airless thin-layer marking using solvent-based paints with ≥70% solids content and viscosity up to 150 seconds (Ford #4 cup). Comprises the basic Kontur 400 chassis and a paint module.
MK400 Paint Module – Standard Configuration:
Repositionable marking unit with 2 paint gun + 2 glass bead gun pairs
Paint tank
Hydraulic agitator
High-pressure paint pump
Fine paint filter on the high-pressure line
Handheld paint gun, 10 m hose
Handheld paint gun extension, 50 cm
Paint flow sensor
GSM/GLONASS data storage and transfer system
Module Options:
Additional third paint gun + glass bead gun pair
Line beginning photo sensor (can be installed on any gun)
Two-line cold spray plastic module 100:2, external mixing
Kontur 400T – Thermoplastic Module
Designed for thick-layer thermoplastic marking. Comprises the basic Kontur 400 chassis and a thermoplastic module.
MT400 Thermoplastic Module – Standard Configuration:
Heat-insulated thermoplastic tank
Hydraulic agitator in thermoplastic tank
Thermal oil circulation system
Temperature control for thermal oil and thermoplastic
Oil burner
Mesh filter in the filling window
Marking unit for flat line extrusion (up to 300 mm wide)
Glass bead gun
Handheld gas burner
Touch-free temperature gauge
Module Options:
Screed box marking unit (instead of standard marking unit)
Kontur 400 Series – Specifications (Text Format)
Engine Type: Diesel (for 400K, 400T, 400H)
Engine Power: 33 kW / 45 HP
Engine Capacity: 1498 cm³
Approval: EU Stage IIIA (TIER 3)*
Compressor: Piston
Optional Compressor: Not available
Maximum Operating Road Gradient: 20%**
Maximum Gradeability: 30%
Transport Speed: 12 km/h
Glass Bead Tank Capacity: 85 L / 130 kg
Control Panel Screen: 5.7 inches
Pre-set Programs: Up to 24
Marking Material:
Kontur 400K: Paint / Spray plastic 100:2
Kontur 400T: Thermoplastic
Kontur 400H: Cold plastic
Maximum Marking Speed:
400K: 8 km/h
400T: 5 km/h
400H: 5 km/h
Marking Material Quantity:
400K: 380 kg
400T: 400 kg
400H: 380 kg
Hardener:
400K: 11 L
400T: N/A
400H: 11 L
Flushing Liquid:
400K: N/A
400T: N/A
400H: 11 L
Fuel Tank Capacity: 42 L
Oil Tank Capacity: 64 L
Second Marking Material Quantity: Not applicable
Lines Applied Simultaneously:
400K: 2
400T: 1
400H: 1
Number of Guns (Applicators / Extruders):
400K: 2
400T: 1
400H: 1
Double Line Width:
400K: Up to 150 mm
400T: N/A
400H: N/A
Single Line Width:
400K: Up to 300 mm
400T: Up to 300 mm (multiples of 50)
400H: 100, 120, 150, 200, 240 mm
Overall Machine Dimensions (L x W x H): 6420 x 1600 x 2280 mm
Transport Dimensions (L x W x H): 3330 x 1600 x 2100 mm
Dry Weight:
400K: 2100 kg
400T: 2300 kg
400H: 2100 kg
Unladen Weight:
400K: 2200 kg
400T: 2400 kg
400H: 2200 kg
Total Weight:
400K: 2800 kg
400T: 3000 kg
400H: 2800 kg
* EU Stage V available upon request
** Gradeability up to 25% upon request