TyreON Truck tools other tire service equipment
Akersloot6460 km to "United States/Columbus"
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+31 6 537...
Show
+31 6 53701658
+31 72 540...
Show
+31 72 540 1002
Netherlands 
Netherlands, Akersloot
Impact wrench TyreON 3260 Nm
Impact wrench TyreON 2180 Nm
Impact wrench TyreON 1450 Nm
The pneumatic impact wrench is indispensable when changing tires.Quality, reliability and safety are therefore a must. TyreON has a number of quality air tools in its range.
TyreON impact wrenches have been developed for heavier mounting and dismantling applications on wheel nuts and wheel bolts.
3 models available from stock
TyreON 3260 Nm-
1 Inch impact wrench with long anvil of 20 cm (8 Inch)
TyreON 2180 Nm-
1 Inch impact wrench with long anvil of 20 cm (8 Inch)
TyreON 1450 Nm-
3/4 Inch impact wrench with short anvil of 4 cm (1.5 Inch)
TyreON 3260 Nm 1 Inch impact wrench with long shaft
The TyreON 3260 Nm impact wrench with extended anvil offers a very high torque of 3260 Nm.
The airwrench with long stroke shaft is particularly suitable for loosening nuts and bolts and changing tires of vehicles such as trucks, lorries, trailers, buses, agricultural vehicles and light construction equipment.
Straight version with loose breaking torque of 3260 Nm / 2400 ft lbs - truck tool with rocking dog pinless hammer impact mechanism.
The advantage of the rocking dog pinless hammer impact mechanism is that the shaft can be turned by hand in the rest position and this accelerates and facilitates the placement of the impact wrench on the nut.
Drive Square 1 "(Inch)
Anvil 20 cm - 8 Inch
Nut or bolt capacity 50 mm
3 position power controller, forward and reverse
No-load speed 3600 rpm
Torque working range 1300 to 2850 Nm
Air inlet 1/2 "NPT
Required hose size 1/2 "- 13 mm
Air pressure 8-12 Bar - 115-175 psi
Air consumption at full load- 40 cfm
Net weight 18.5 KG
With 2 sockets 1-1 / 2 "(38mm) + 1-5 / 8" (41mm)
TyreON 2180 Nm 1 Inch impact wrench with long shaft
The TyreON 2180 Nm impact wrench with extended anvil offers a very high torque of 2180 Nm.
The airwrench with long stroke shaft is particularly suitable for loosening nuts and bolts and changing tires of vehicles such as trucks, lorries, trailers, buses, agricultural vehicles and light construction equipment.
Straight version with breakaway torque of 2180 Nm / 1600 ft lbs - truck tool with rocking dog pinless hammer impact mechanism
The advantage of the rocking dog pinless hammer percussion mechanism is that the shaft in the rest position is loose and can be turned by hand, which speeds up finding the correct position of the cap on the bolt or nut.
Drive Square 1 "(Inch)
Anvil 20 cm - 8 Inch
Nut or bolt 41 mm
3 position power controller, forward and reverse
No-load speed 4200 rpm
Torque working range 900 to 1850 Nm
Air inlet 1/2 "NPT
Required hose size 1/2 "- 13 mm
Air pressure 8-12 Bar - 115-175 psi
Air consumption at full load- 40 cfm
Net weight 14 KG
With 2 socktes 1-1 / 2 "(38mm) + 1-5 / 8" (41mm)
TyreON Automotive Equipment
1921 CZ Akersloot
The Netherlands (EU)
(T) show contacts
(E) show contacts
Our showroom is open from Monday to Friday from 9 a.m. to 5 p.m.
TyreON 1450 Nm 3/4 inch impact wrench with short shaft
The TyreON 1450 Nm impact wrench has a high torque of 1450 Nm.
The airwrench is suitable for loosening nuts and bolts and changing tires of vehicles such as trucks, trucks, trailers, buses, light construction equipment and agricultural vehicles.
Straight version with breakaway torque of 1450 Nm / 1075 ft lbs - truck tools with twin hammer hammer mechanism
The twin hammer stroke mechanism gives a high energy per stroke. The energy is transmitted directly to the drive square for maximum power.
Drive square 3/4 "
Anvil 4 cm - 1.5 Inch
Nut or bolt capacity 32 mm
3 position power controller, forward and reverse
Idle speed 5300 rpm
Torque working range 600 to 1300 Nm
Air inlet 3/8 "NPT
Required hose size 3/8 "- 10 mm
Air pressure 8-12 Bar - 115-175 psi
Air consumption at full load- 40 cfm
Net weight 5.8 KG
With 2 sockets 1-1 / 2 "(38mm) + 1-5 / 8" (41mm)
Prices truck tools - Air impact wrenches
TyreON 3260 Nm
- € 495, - excl. VAT
1 "impact wrench with 20 cm long anvil
TyreON 2180 Nm
- € 395, - excl. VAT
1 "impact wrench with 20 cm long anvil
TyreON 1450 Nm
- € 195, - excl. VAT
3/4 "impact wrench 4 cm short anvil
Truck tools