Traub TNL 32 P metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
Control Brand: TRAUB
Control Model: TX 8i-p
Counter Spindle: yes
Driven Tools: yes
Max. Bar Diameter: 32 mm
Spindle Power: 10.7 kW
Through-spindle Coolant: yes
Number of Turrets: 2
Maximum Z-Axis Travel: 305 mm
Main Spindle Torque: 21 / 32 Nm
Main Spindle C-Axis Resolution: 0.001°
Turret 1 Tool Stations: 10
Turret 1 Live Tool Stations: 10
Turret 1 Live Tool Speed: 12,000 rpm
Turret 1 Live Tool Power: 1.5 / 2.5 kW
Turret 1 Tool Holder Diameter: 45 mm
Turret 1 Turning Tool Shank: 16 x 16 mm
Turret 1 X-Axis Travel: 140 mm
Turret 1 Z-Axis Travel: 305 mm
Turret 1 H-Axis Resolution: 0.001°
Turret 1 Chip-to-Chip Time: 0.3 sec
Turret 2 Tool Stations: 9
Turret 2 Live Tool Stations: 9
Turret 2 Live Tool Speed: 12,000 rpm
Turret 2 Live Tool Power: 1.5 / 2.5 kW
Turret 2 Tool Holder Diameter: 45 mm
Turret 2 Turning Tool Shank: 16 x 16 mm
Turret 2 X-Axis Travel: 140 mm
Turret 2 Y-Axis Travel: 25 / +40 mm
Turret 2 Z-Axis Travel: 320 mm
Turret 2 Chip-to-Chip Time: 0.3 sec
Counter Spindle Power: 1.5 / 2.5 kW
Counter Spindle Torque: 4.5 / 7.7 Nm
Counter Spindle C-Axis Resolution: 0.001°
Maximum Clamping Length: 250 mm
Maximum Bar Diameter (Counter Spindle): 32 mm
Back Working Tool Stations: 8
Back Working Live Tool Stations: 3
Back Working Live Tool Speed: 12,000 rpm
Back Working Live Tool Power: 1.5 / 2.5 kW
Back Working Tool Holder Diameter: 36 mm
Rapid Traverse (X / Y / Z): 20 / 20 / 20 m/min
Maximum Feed Rate: 20,000 mm/min
Total Power Requirement: 46 kW
Space Requirement incl. Bar Feeder: 8,000 x 2,500 x 2,600 mm
Chip Conveyor: Optional, not included
Coolant System: Yes
Tool Turrets: 2
Back Working Unit: Yes
Bar Feeder Interface: Yes
Bar Feeder: LNS Hydrobar Express 332 S2 / 3 m
Electronic Handwheel: Yes
Hydraulic Unit: Yes
Machine defects: The counter spindle is currently unusable due to prolonged inactivity. Either the sensor or the motor is defective