Seiger SLZ 500E metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
+49 162 5858448
Germany, Weißenfels
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: DE
Control Brand: HEIDENHAIN
Control Model: MANUAL plus 620
Counter Spindle: No
Driven Tools: Yes (Sauter 8-station disc turret for driven tools, VDI shaft D=30 mm with digital servo motor)
Spindle Power: 20 kW
Spindle Power (100/60% ED): 20 / 25 kW
Taper Size: DIN 55027 Size 8 (Main Spindle Nose) / MT 5 (Tailstock Quill)
Tool Stations: 8-station Sauter disc turret + Parat 4-way quick-change holder Size 3
Through-Spindle Coolant: No
Max. Bar Diameter: 78 mm (through Schunk chuck) / 93 mm (spindle bore)
Max. Workpiece Diameter: 500 mm (swing over bed) / 280 mm (swing over cross slide)
Positioning Accuracy: According to DIN 8605
C-axis Specification: Pneumatically engaging with digital motor and gear drive on main spindle (Spindle speed up to 15 rpm, Torque ca. 420 Nm)
Bed Width: 350 mm
Turning Tool Cross Section (H x W): 25 x 25 mm
Spindle Diameter in Front Bearing: 130 mm
Inner Taper of Main Spindle: Metric 100
Maximum Spindle Torque: approx. 1400 Nm
Feed Force Z-axis: 10,000 N
Feed Force X-axis: 7,000 N
Feed Range (Longitudinal/Planar): 0.001 - 6000 mm/rev
Rapid Traverse Speed X/Z: 10 / 7 m/min
Tailstock Quill Diameter: 90 mm
Tailstock Quill Stroke: 180 mm
Max Workpiece Weight (Between Centers): 1,000 kg (1,250 kg with steady rest)
Max Workpiece Weight (Flying in Chuck): 300 kg (at 200 mm center of gravity distance)
Operating Voltage: 400 V / 50 Hz
Control Voltage: 24 V DC
Connected Load: 41 KVA
Current Rating: 60 A
Main Fuse: 63 A
Chip Conveyor: discharge height 1000 mm, length 535 mm, 60-degree gradient, continuous feed, ca. 250 dm³/h capacity, speed ca. 2 m/min
Two-speed Planetary Gearbox: Item 6054375, automatically shifting, flanged on main spindle motor
Parat 4-Way Turret Quick-Change Holder: Size 3, manually operated, mounted on zero-point clamping system
Sauter 8-Station Disc Turret for Driven Tools: VDI shaft D=30 mm with digital servo motor, mounted behind turning center
Boring Block: with VDI 50 retainer and internal coolant supply, mounted on zero-point clamping system in front of turning center
Zero-Point Clamping System: base part mounted on cross slide
Hydraulic Hollow Clamping Unit: Schunk ROTA THW plus D=315 mm 3-jaw chuck with DIN 55027 Size 8 mount and 78 mm bore passage
Reinforced Coolant Pump: (2.5 bar at 40 L/min, max 5.4 bar at 8 L/min) controlled via frequency inverter and potentiometer
Hand Spray Gun: connected to coolant unit
Enclosure Extension: tailstock side closed extension with pivoting door
Tailstock Driver: Item 6061611, mounted on bed slide for dragging tailstock
Machine Setup Elements: Item 6054102, 10 pcs machine feet with screws and anchors
Extraction Unit Installed: IFS Industrie-Filter-Service GmbH IF-Vario M 1600 (Model M 1600, YOM 04-2020, Weight 85 kg, 400/460 V, 50/60 Hz, 0.75 kW, 1.7/1.8 A, IP 54)
Additional Equipment
Chip protection wall
2 movable sliding safety doors with windows
machine light
Quick-change tool holder size C
coolant device
live center MT 5
operator tool set
linear scale in X-axis
safety clutch in X and Z axes