Citizen A20 metal lathe
Kaiserslautern
If you decide to buy equipment at a low price, make sure that you communicate with the real seller. Find out as much information about the owner of the equipment as possible. One way of cheating is to represent yourself as a real company. In case of suspicion, inform us about this for additional control, through the feedback form.
Before you decide to make a purchase, carefully review several sales offers to understand the average cost of your chosen equipment. If the price of the offer you like is much lower than similar offers, think about it. A significant price difference may indicate hidden defects or an attempt by the seller to commit fraudulent acts.
Do not buy products which price is too different from the average price for similar equipment.
Do not give consent to dubious pledges and prepaid goods. In case of doubt, do not be afraid to clarify details, ask for additional photographs and documents for equipment, check the authenticity of documents, ask questions.
The most common type of fraud. Unfair sellers may request a certain amount of advance payment to “book” your right to purchase equipment. Thus, fraudsters can collect a large amount and disappear, no longer get in touch.
- Transfer of prepayment to the card
- Do not make an advance payment without paperwork confirming the process of transferring money, if during the communication the seller is in doubt.
- Transfer to the “Trustee” account
- Such a request should be alarming, most likely you are communicating with a fraudster.
- Transfer to a company account with a similar name
- Be careful, fraudsters may disguise themselves as well-known companies, making minor changes to the name. Do not transfer funds if the company name is in doubt.
- Substitution of own details in the invoice of a real company
- Before making a transfer, make sure that the specified details are correct, and whether they relate to the specified company.
Seller's contacts
+49 162 58...
Show
+49 162 5858448
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Germany, Kaiserslautern
Location: IT
Counter Spindle: yes
Driven Tools: yes
Max. Bar Diameter: 25.4 mm
Spindle Power: 3.7 kW
Condition: Under power, visible in operation
Spindle hours: approx. 7,000 h
Total axes: 6 (5 linear: X1, Y1, Z1, X2, Z2 + C-axis)
C-axis: on main and counter spindle, resolution 0.001°, 90° index 0.27 s
Max bar diameter: 20 mm standard; Large Bore option installed: 25.4 mm (1")
Max machining length per chucking: 200 mm with synchronized guide bush
Max projection from counter spindle: 80 mm
Max speed: 10,000 rpm (limited to 8,000 rpm with 25.4 mm bore by parameter)
Max drilling: Ø12 mm
Max tapping: M8
Total tool positions: 22 + α
Live tooling: Yes
Driven tools: 4
Driven tool motor power: 0.75 kW
Max live tooling speed: 8,000 rpm
Gang tool post: 5 turning tools, 16 x 16 mm
Cross driven tools: 4 x ER16
Front tool positions: 4 fixed driven tools + 2 double ER11 positions
Rear tool positions: 3 fixed tools + 1 ER11 driven tool on counter spindle
X1: 55 mm; Y1: 308 mm; Z1: 200 mm
X2: 55 mm; Z2: 200 mm
Rapid traverse: 30 m/min (X/Y/Z)
Linear resolution: 0.0001 mm
Rotary resolution: 0.001°
Oil tank capacity: 180 L
Power supply: 200 V ±10%, 50/60 Hz
Power requirement: approx. 13 kVA (15 kVA with high pressure coolant)
Air supply: 0.5 MPa, 100 NL/min
Bar feeder: LNS EXPR S3 320 Z, 3 m capacity, up to Ø25 mm
High pressure coolant system: Citizen 1.5 MPa, 15 L/min, 50 μm filter
Chip conveyor: Hinged type, rear discharge
engine power: 2.2 / 3.7 kW
Axes/configuration
Working capacity
Main spindle
Counter spindle
Max speed: 8,000 rpm
Motor power: 1.1 / 1.5 kW
C-axis: Yes
resolution 0.001°
Tooling system
Tooling layout
Travels
Feed/accuracy
Fluids
Installation data
Installed options
Large Bore option S393 with 25.4 mm (1") spindle bore
Additional equipment
Long parts discharge
Extraction unit (mist/fume)